Fitting And Replacing Grinding Tools - HTC 800 RX Manual

Usage
4. Tip the machine further back, until all of the machine reaches the floor,
see Figure 4-11, page 22.
Figure 4-11. Machine on the floor
4.7

Fitting and replacing grinding tools

Warning!
Disconnect the electrical supply when cleaning, changing tools or repairing the
machine.
Warning!
The tool becomes very hot during use. Tip the machine back and allow it to
stand for a short while. Use protective gloves when removing the tools.
As the machine is equipped with the patented EZchange tool system, fitting and
replacing grinding tools is quick and easy. The tool system consists of wings on which
diamond grinding tools are fitted without the need for screws.
22
HTC 800 RX
2.0