Overload; Making Operation Easier - HTC 650 HDX Manual

HTC 650 HDX
4. Turn the key to the right "On".
5. Start the grinding discs' rotation by turning the knob to "Start".
4.8.4

Overload

If the machine is using too much power, the Overload indicator on the control panel
goes off. The machine switches off automatically after a while if this is ignored. Reduce
the speed of the grinding discs to see if the Overload indicator goes out. If this does not
help, follow the procedure for troubleshooting.
Tip!
If the machine is heavy to operate, it can be due to the placing of the weights.
Fold the weights up or back to unload the grinding head.
4.9

Making operation easier

In order to keep the suction hose for the dust extractor and the power cable out of the
working area and/or path of the machine, the hose and cable can be arranged as shown
in the picture below.
Figure 4-12. Making operation easier
Tip!
By arranging the hose and cable as shown in the picture, you avoid disruptive
stoppages caused by having to re-position the cable and hose.
3.0
Operation
23