Advertisement
ROCK LADDER
ASSEMBLY
H81
ATTACHMENT BOARD - W4L14394
(1)
1"x3 3/8"x20 1/4" (24x86x514)
M71
ROCK BOARD - W4L14175
5/8"x3 3/8"x20 1/4" (16x86x514)
(6)
1. Assemble slats to rails as shown.
2. Note orientation of slats, be sure to arrange as shown.
3. See drawing below for slat spacing on rails.
4. Using slats as a guide, pre-drill top edges of rails with a 1/8"
drill bit. Failure to pre-drill may result in board splitting.
PRE-DRILL TOP EDGE OF RAILS
M72
ROCK WALL SLAT - W4L14176
5/8"x3 3/8"x20 1/4" (16x86x514)
(2)
H100086
SCREW PFH
(32)
8x1 1/2
3 in [75 mm]
TYP
H73
H100089
SCREW PFH
(4)
8x1 3/4
THESE SURFACES FLUSH BOTH SIDES
ALIGN FRONT EDGE OF SLAT WITH TOP OF RAIL
3 in [75 mm]
TYPICAL SLAT SPACING
7 SPACES
28
ROCK WALL RAIL - W4L14153
(2)
1"x3 3/8"x51 1/8" (24x86x1299)
FLUSH
Advertisement
