Air Supply Line; Ground The Cabinet - Graco Pro Xp 60 AA WB Instructions - Parts Manual

Air Supply Supply Line Line
Air Air Supply Line
To reduce the risk of electric shock, the air supply
hose must be electrically connected to a true earth
ground. Use Use Use only only only Graco Graco Grounded Graco
Hose.
Hose. Hose.
To reduce the risk of electric shock or other
serious injury, you must use the red-colored Graco
Electrically Conductive Air Hose for the gun air
supply. Do not use the black or gray-colored Graco
air hoses.
1. See Fig. 12. Install an air line filter/water
separator (M) on the main air supply line to
ensure a dry, clean air supply to the gun. Dirt and
moisture can ruin the appearance of your finished
workpiece and can cause the gun to malfunction.
2. The WB3000 system includes a bleed-type air
regulator (N) on the gun air supply line (P), to
control air pressure to the gun.
3. Connect the red-colored Graco Electrically
Conductive Air Hose (P) between the gun air
regulator (N) and the gun's air inlet. The gun air
inlet fitting has a left-hand thread. Connect the
air supply hose ground wire (Q) to a true earth
ground.
Trapped air can cause the fluid supply unit to
cycle unexpectedly, which can result in serious
injury, including splashing fluid in the eyes or
on the skin. Do not operate the equipment
without the bleed-type air valve (B) installed.
4. The WB3000 system includes a bleed-type air
valve (B). The bleed-type air valve is required
to shut off all air to the system and relieve air
trapped between the valve and the fluid supply
unit after the air regulator is shut off. Connect the
main air supply line (A) to the bleed valve.
5. Install an additional bleed-type air valve (CC)
upstream of the air filter (M) to isolate the filter
for servicing.
3A2497H
Grounded Air Grounded Air Supply Air Supply Supply
Ground the the Cabinet Cabinet
Ground Ground the Cabinet
Connect the main ground wire (V) to a true earth
ground.
Installation
15