Advertisement
Connect Fluid Hoses
Connect the fluid supply hoses to outlet hose
connections (F
. 3). Red hoses for component A (ISO),
IG
blue for component B (RES). Fittings are sized to
prevent connection errors. Connect the other end of
hoses to A and B inputs of the gun.
NOTICE
To prevent pressure fluctuations and equipment
damage, only operate equipment with fluid supply
hoses longer than 25 ft.
Connect Gun to Air Hose
(Air-Operated Guns Only)
Connect the gun air hose to the gun air input and to the
air filter outlet. If you are using more than one hose
bundle, join the air hoses with the nipple provided with
the hose bundle.
F
. 3 Hose and Air Connections
IG
3A5743C
Connect Main Air Supply
The system requires 4 scfm (0.112 m
air for the air operated spray guns to work correctly.
Connect the main air supply to the quick disconnect
fitting on the unit. The air supply hose must be at least
5/16 in. (8 mm) ID up to 50 ft (15 m) or 3/8 in. (10 mm)
ID up to 100 ft (30 m).
Flush Before Using Equipment
The equipment was tested with lightweight oil, which is
left in the fluid passages to protect parts. To avoid
contaminating your fluid with oil, flush the equipment
with a compatible solvent before using the equipment.
See Flushing, page 19.
B (RES) Blue
B (RES) Blue
Setup
3
/min) compressed
A (ISO) Red
Compressed Air Line
A (ISO) Red
Air
5
Advertisement
