Pto Warning Light Logic - Valtra F Series Operator's Manual

3. Operation
Engage the PTO switch (4), or the
4.
mechanical PTO clutch lever (5).
Move from the operator's seat, and in less
5.
than 5 seconds, engage the PTO switch (4),
or the mechanical PTO clutch lever (5) again.
NOTE:
If the PTO is on when you move from the
operator's seat, the PTO automatically stops.

3.2.9 PTO Warning Light Logic

WARNING:
The PTO Warning Light status depend of the engine rpm, ground drive PTO control (if
equipped) and PTO speed control.
All possible PTO control combinations are described in the following table with the correspondent Warning
Light status:
Ground PTO
control
Independent
Independent
OFF
OFF
OFF
OFF
ON
102
PTO clutch Speed PTO
Control
ON
ON Independent
ON
ON
ON
OFF Independent
Independent Independent
Fig. 100
Fig. 101
Engine rpm
Control
Neutral Independent
<400
540 >400
540 E >400
1000 >400
Independent
<400
GUID-845A5C55-F9FF-4ECE-8243-C29263D411E2-high.jpg [High]
GUID-9FF4E4A9-F085-4399-AD2A-EE85A71B3244-high.jpg [High]
GUID-38CA0B15-EEE6-4001-A819-6B5995AB4442 [V1]
PTO warning light
status
540+540E Flashing
540+540E Flashing
540 ON
540 E ON
1000 ON
All lights OFF
540+540E Flashing
F Series
39940211 (555124)