Operator Menu - Valtra F Series Operator's Manual

Use the digital display controls (1) and (2) to
change the functions. For example, the language.
You can also change other data, this includes:
• Operating hours
• Fuel consumption
• Diesel particulate filter (DPF), (filling
percentage)
• Coolant temperature
• Transmission oil temperature (only with
PowerShuttle transmission)
• Front wheel drive conditions
Press for a maximum of 0.3
seconds:
Press for a minimum of 1 second: Select
• To open the menu, press (1).
• To select, and open the subsequent menu (ON, OFF or AUTO), press (1).
• To make a selection, press (1) for more than 1 second.

3.1.8 Operator menu

NOTE:
Stop the vehicle, and engage the parking brake, before you open the menu. The menu closes automatically
if the vehicle moves.
Functions of the digital display controls
(1)
Press for a
maximum of Up
0.3 seconds:
Press for a
minimum of 1 Select
second:
Open the menu: With the key set in ON position,
press and hold (2) for 1 second.
Navigate to the functions: Press (1) or (2), to see
the different functions.
Close the menu: Press (1) and (2) at the same
time, for 1 second.
F Series
39940211 (555124)
Functions of the digital display controls
(1)
Up
(2)
Down
Open and close
the submenu
Fig. 34
(2)
Down
Open and close the submenu
Fig. 35
3. Operation
GUID-3D6E2B0C-98B1-453C-BB4F-F3FBDB8F0DEE-high.jpg [High]
GUID-02157F45-53E3-4963-A891-496023741240 [V1]
GUID-3D6E2B0C-98B1-453C-BB4F-F3FBDB8F0DEE-high.jpg [High]
69