Change The Oil Suction Strainer - Valtra F Series Operator's Manual

4. Maintenance
GUID-6DA9BBF7-4EF1-4D11-BCFC-DE41E019BA29-high.jpg [High]
Fig. 107
Remove the oil filler cap.
Fill with the specified fluid and volume (see the "Lubricants and additives" and "Capacities" section).
Install the oil filler cap.
GUID-FED09DF1-43D6-4C99-85F9-C7F02750780E [V1]

4.12.18 Change the oil suction strainer

Drain the Transmission hydraulic oil.
Remove the four clamps (B) and the two hoses
(C).
Replace the strainer (D) with a new one. Make
sure that the arrow on the strainer body points
forward.
Re-install the clamps.
Refill transmission oil.
GUID-282D3A14-9C55-4208-9551-5C137D4EC685-low.png [Low]
Fig. 108
200 F Series
39940211 (555124)