Note To The Operator; Roll-Over Protective Structure (Rops) - Valtra BH144 HiTech Operator's Manual

Hide thumbs Also See for BH144 HiTech:
Table of Contents

Advertisement

1.2.3 Note to the operator

It is your responsibility to read and understand the safety section of this Manual before operating the
machine. You must follow the safety instructions that will guide you, step by step, throughout your working
day.
Remember that you play a crucial part in ensuring that operation of the machine is safe. Good safety
practices not only protect you, but also the people around you. Carefully read the safety practices
contained in this Manual and include them in your safety program.
Remember that this safety section was prepared especially for this machine. Follow all usual and
customary safety precautions and, above all, remember that your safety depends on you. You can prevent
accidents.

1.2.4 Roll-Over Protective Structure (ROPS)

NOTE: The roll-over protective structure (ROPS) is tested and approved pursuant to the Brazilian ABNT
NBR ISO 5700 - Roll-Over Protective Structure (ROPS) standard and the international ISO 5700 standard.
The ROPS is designed to protect the operator in the event that the tractor rolls over. The top of the ROPS
can be folded for transport by truck, or when the tractor is being used in field conditions where height
limits its use. When the ROPS is folded, the safety belt should not be used. Under these conditions, take
extra care. The structure does not protect the operator when in the folded position.
The ROPS must always be kept in a vertical position, unless you are operating in the situations described
above.
Always keep the ROPS in a vertical position and latched. In this condition, the safety belt should be used
and latched.
If the ROPS is damaged during operation:
• Do not:
-
Weld, drill, fold or detach.
-
Use the tractor with the damaged ROPS.
-
Attach chains, ropes or cables to the frame to pull anything. Only pull from the tractor draw bar.
• Do:
-
Make sure that the structure is properly attached to the tractor.
-
Ensure that all components are in order, to provide the desired protection
-
Only use original Valtra parts to ensure the integrity of the structure during its maintenance.
The following additional safety precautions must be strictly observed:
CAUTION:
Use a seat belt at all times, except when the top part of the structure is folded. Adjust
the belt comfortably.
If the tractor rolls over, hold the steering wheel firmly. Do not attempt to jump from the
tractor. However, if the ROPS is folded, leave the tractor immediately.
Ensure that the safety decals are unobstructed or covered for future reference at all
times.
A plastic canopy does not protect the operator against falling objects.
BH 4th Generation
ACW5554370
Find manuals at https://best-manuals.com
1. Safety
GUID-79E5AF69-71F1-4989-AAE1-7FAB77773D8B [V2]
GUID-A454C04B-5433-4FAD-85CA-9B8577966460 [V3]
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bh154 hitechBh174 hitechBh184 hitechBh194 hitech

Table of Contents