Using The Remote Commander To Change Service Data - Sony KF-E42A10 Service Manual

2-4. USING THE REMOTE COMMANDER TO
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
Item Number Data Value
Category
STATUS
Adjustment
SHUTDOWN_LOG1
Item
SAIPH
CHIMERA PROGRAM
HDMI
1. Access Service Adjustment Mode and select the Service Menu that
contains the Category with the Adjustment Item you want to change.
2. To change the Category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the
Service Menu displayed. To change a Category on one of the other
Service Menus, press the JUMP button until the correct Service
Menu is displayed.
3. To change the Adjustment Item, press 1 or 4 on the Remote
Commander.
4. To change the Data Value, press 3 or 6 on the Remote
Commander.
Note: To go back to the last saved Data Value, press 0 then
ENTER on the Remote Commander to read the memory.
5. To save the changes, press MUTING then ENT to write into
memory.
6. To exit service mode, turn the power off by pressing POWER .
Wait 2 minutes before restarting the set to allow the fans to
completely shut down or the Service Menu will appear on the screen.
KF-E42A10/E50A10
0 SERVICE
0 TV MICRO
PROGRAM : 0.xxx
BOOT : 0.xxx
NVM : 0.xxx-0000
: 1.xxx
PACK : 1.xxx
OSD : x.xxx
NVM A0 : x.xxx
NVM AC : x.xxx
NVM AE : ----
: 1.xxx
MUTING
Writes data
into memory
Display 1
Next Item
Display
2
Next Category
Service
Display 4
Menu
Previous Item
Displays JUMP
Service Menus
KF-E42A10/E50A10
MUTING TV/VIDEO POWER TV POWER
DVD/ SAT/
DVR VCR CABLE TV
FUNCTION 3
6
ENT
JUMP TV/SAT MTS/SAP FREEZE
5
SOUND PICTURE WIDE
SUR
ENT
Reads data
PREV REPLAY ADVANCE NEXT
from last
saved NVM
PLAY
VISUAL SEARCH PAUSE STOP
VOL CH
REC REC PAUSE REC STOP
F1 F2
TOP MENU MENU
TV
RM-YA003
Increase
Data Value
Decrease
Data Value
Display
Previous
Category
0
72