Sony KF-E42A10 Service Manual page 51

LIGHTNING GROUND INSTALLATION (3 OF 4)
9
Install Faston Tabs in F-Pin Terminal Bracket. Any one
of the three terminals on the bracket can be used.
Main point is to secure BOTH faston terminals on the
bracket.
11
CAUTION: When routing the Lightning ground, make
sure the cables do not bend upwards near the
Optical Block. Wire MUST remain routed low near
Optical block.
KF-E42A10/E50A10
10
CAUTION: Make sure that excessive force is not used to secure
the faston terminals on the bracket. Bending the bracket upwards
is NG condition. It will push the plastic bracket out of alignment,
making it difficult to install rear cover later.
11a
KF-E42A10/E50A10
Tool / Torque
Caution Points
Please Follow All
CAUTION points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
51