Sony KF-E42A10 Service Manual page 40

B BLOCK ASSEMBLY (4 OF 5)
13
Install Optical Unit Bracket, retention screw. Fix
bracket/screw with 3x12mm screw.
15
Install Shield Cover. Apply 3x8mm screws [6 places],
and M3 Clamp (p/n:2-594-860-01).
CAUTION: Note direction and location of M3 Clamp
KF-E42A10/E50A10
14
Install complete digital sub-unit into Digital Shield case.
CAUTION: Make sure cables at top of case do not pinch on metal parts.
16
Install 3x8mm screws [5 places], LVDS Spring Plate
(p/n:2-342-919-01) and M3 Clamp (p/n:2-594-860-01)
CAUTION: Note direction and location of M3 Clamp.
CAUTION2: Take caution when installing screw with
LVDS Spring plate. Tip of screwdriver can damage
LVDS Connector.
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
- 5kg-cm +-0.5kg-cm
Caution Points
Please Follow All
CAUTION points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
40