Sony KF-E42A10 Service Manual page 60

SPEAKER GRILL ASSEMBLY (1 OF 3)
1
Install Conn. Assy. 1-910-021-67 on HB-Bd. Route wire
in slot on Boss.
CAUTION: Make sure wires are in slot before applying
Latch. Pinch point.
3
Route wires of 1-910-021-67 in plastic tabs next to
HA-Bd. Use UL Tape as alignment guides for correct
position of cables.
KF-E42A10/E50A10
2
Install Latch (p/n:4-088-589-11) on slotted boss with 3x12mm screw.
p/n: 7-685-648-79
CAUTION: Make sure wires do not pinch between boss and latch.
4
Attach connector to HA-Bd and route as shown.
CAUTION: Make sure there is sufficient slack in the
cable connected to HA-Bd, so that control door can
open freely. If there is tension on the cable when the
door is opened, the connection can be broken.
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[3x12mm]
- 7kg-cm +-1.0kg-cm
Caution Points
Please Follow All
CAUTION points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
60