Sony KF-E42A10 Service Manual page 33

B BLOCK ASSEMBLY INSTALLATION (2 OF 5)
5
Install 11P (p/n:1-910-021-68) and black cable from
HPC assembly (p/n:1-910-015-31) on B-Block.
CAUTION: 11P Conn. Assy. (with ferrite core) is routed
OVER the black HCP Conn. Assy. This routing is best
for minimizing EMI. Try not to make a variation of
7
shown routing.
Bend over M4 wire clamp on B-Block to wire dress the 11P
Conn. Assy. (with ferrite core). Main purpose is to hold the
wires against B-Block.
CAUTION: 11P Conn. Assy. Is routed OVER black HPC Cable.
Please do not make a variation of this wire routing. It is NG for
EMI.
KF-E42A10/E50A10
6
Install 20P Connector Assembly (p/n:1-910-015-28) on B-Block side.
Make sure cable is routed OVER ferrite core and OVER 11P Conn. Assy.
(with ferrite core).
CAUTION: Please do not make a variation of the shown wire routing. It
is NG for EMI.
8
Another View of Proper Wire Routing.
CAUTION: Please try not to make a variation of the shown wire
routing. It is NG for minimizing EMI.
KF-E42A10/E50A10
Tool / Torque
Caution Points
Please Follow All
CAUTION points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
33