Download  Print this page

Sony KF-E42A10 Service Manual

Mix5 chassis lcd projection tv.
Hide thumbs

Advertisement

HISTORY
Model Name : KF-E42A10/E50A10
SERVICE MANUAL
Part No.
: 9-872-761-01
When clicking an item, it's detail is displayed.
Change of
Date
SUPP./CORR.
Description of SUP/COR
main text
2005.8
NEW

Advertisement

Table of Contents

   Also See for Sony KF-E42A10

   Summary of Contents for Sony KF-E42A10

  • Page 1 HISTORY Model Name : KF-E42A10/E50A10 SERVICE MANUAL Part No. : 9-872-761-01 When clicking an item, it’s detail is displayed. Change of Date SUPP./CORR. Description of SUP/COR main text 2005.8 – –...
  • Page 2: Service Manual

    SERVICE MANUAL MIX5 CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. –––––– –––––––––––– ––––– ––––––––––– –––––– –––––––––––– ––––– ––––––––––– KF-E42A10 RM-SA001 CHINA KF-E50A10 RM-SA001 CHINA TIMER LAMP POWER/STANDBY PUSH OPEN POWER WEGA GATE TV/VIDEO VOLUME CANNEL RM-SA001...
  • Page 3: Specifications

    : 0.7 Vp-p, 75 ohms KF-E50A10: 50 inches (approx. 125.5 cm measured Signal format : 480i, 576i, 480p, 576p, 720p,1080i diagonally) VIDEO: KF-E42A10: 42 inches (approx. 105.2 cm measured 1 Vp-p, 75 ohms unbalanced, sync negative diagonally) AUDIO: Display Resolution: 1,280 pixels (horizontal) ∀...
  • Page 4: Overview Of The Tv Buttons And Indicators

    KF-E42A10/E50A10 RM-SA001 RM-SA001 Overview of the TV buttons and indicators To open the panel To open the front panel of your TV, push up the panel door just under WEGA GATE mark. PROG WEGA GATE PROG 1 WEGA GATE Displays WEGA GATE.
  • Page 5 After turning on your TV, it may take a while (1 minute or less) before the picture appears. When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-2400 replacement lamp (not supplied). How to replace the lamp, see page 5. Warning The light emitted from the lamp is quite bright when your TV is in use.
  • Page 6: Replacing The Lamp

    Take the new lamp out of the box. Use a Sony XL-2400 replacement lamp (not supplied) for Do not touch the glass portion of the new replacement. Use of any other lamp may damage the projection TV.
  • Page 7 Hook a finger through the loop of the lamp handle and pull the handle upwards. Then pull the lamp straight out. Notes Consult your Sony dealer for a Sony XL-2400 Notes replacement lamp. The lamp is very hot immediately after use. Never...
  • Page 8 SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUM- BERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE- MENTS PUBLISHED BY SONY. CIRCUIT ADJUSTMENTS THAT ARE CRITICAL TO SAFE OPERATION ARE IDENTIFIED IN THIS MANUAL.
  • Page 9: Table Of Contents

    KF-E42A10/E50A10 RM-SA001 RM-SA001 TABLE OF CONTENTS Section Title Page Section Title Page –––––– –––– –––– –––––– –––– –––– 2-22-14. Pull Out Some Blocks (7) ......1. SELF DIAGNOSIS FUNCTION ..... 2-22-15. Pull Out Some Blocks (8) ......2-22-16. Pull Out Some Blocks (9) ......
  • Page 10: Section Title Page

    KF-E42A10/E50A10 RM-SA001 RM-SA001 Section Title Page –––––– –––– –––– 5. EXPLODED VIEWS 5-1. Screen Mirror Block, Cover ....... 5-2. B Block, Chassis Assembly ....... 5-3. Lamp Duct Assembly, Optics Unit Block ..6. ELECTRICAL PARTS LIST • AS Board ..............
  • Page 11: Self Diagnosis Function

    KF-E42A10/E50A10 SECTION 1 RM-SA001 RM-SA001 SELF DIAGNOSIS FUNCTION 1. Summary of Self-Diagnosis Function - This device includes a self-diagnosis function. - In case of abnormalities, the POWER/STANDBY indicator automatically blinks. It is possible to predict the abnormality location by the number of blinks. The Instruction Manual describes blinking of the POWER/STANDBY indicator.
  • Page 12 KF-E42A10/E50A10 RM-SA001 RM-SA001 3. Blinking count display of POWER/STANDBY indicator - One blink is not used for self-diagnosis. - Example Diagnosis item LED blinks Lamp cover 3 times POWER STD/DUO LAMP STANDBY TIMER POWER/STANDBY 4 times LED ON : 0.3sec...
  • Page 13 KF-E42A10/E50A10 RM-SA001 RM-SA001 - The results display is not automatically cleared. In case of repairs and after repairs, check the self-diagnosis screen and be sure to return the results display to "0". - If the results display is not returned to "0" it will not be possible to judge a new malfunction after completing repairs.
  • Page 14 KF-E42A10/E50A10 RM-SA001 RM-SA001 BLOCK DIAGRAM AGU board Fan1 IC8002 S2 board TV Micro-computer Fan2 IC7180 Temp. Fan3 IIC-TV Sensor Fan4 FAN-ERR HB board CN8002 IC7021 IIC-TV Temp. +12V LB-ERR Sensor B board BE-OVP B_12V QG board IC4100 BE Micro-computer ATSC ATSC-OVP 10.5V...
  • Page 15 KF-E42A10/E50A10 RM-SA001 RM-SA001 Reading Lamp and Panel time Use the following to determine the lamp and panel time of a set. Screen Display Method In standby mode, press the buttons on the Remote Commander sequentially, in rapid succession, as shown below: 1.
  • Page 16: Disassembly

    KF-E42A10/E50A10 SECTION 2 RM-SA001 RM-SA001 DISASSEMBLY 2-1. REAR COVER E42A10 1 Pull down the claw Lamp door E50A10 – 15 –...
  • Page 17: Service Position

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-2. SERVICE POSITION 5 Pull out B block slightly 4 3 screws (+BVTP 4x16) 3 Side stay (L) 1 2 screws (+BVTP 4x16) 7 Loosen wire holders 6 Pull out chassis block slightly – 16 –...
  • Page 18: Terminal Bracket

    KF-E42A10/E50A10 RM-SA001 RM-SA001 9 Turn chassis dssembly 8 Loosen wire holders GT board B side 2-3. TERMINAL BRACKET 2-4. HPC BOARD 1 2 screws (+BVTP 3x12) 3 Screw (+PSW M3x8) 1 2 connectors HPC baord 2 2 screws 2 Screw (+PSW M3x8)
  • Page 19: Fan (under The As Board)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-6. D.C FAN (UNDER THE AS BOARD) 1 2 screws (+BVTP 3x12) 3 D.C fan 2 F shield sheet (Fan) 2-7. B BLOCK 1 Connector B block B block 2 3 connectors 3 4 connectors 2-8. B BOARD...
  • Page 20: B And Qg Boards

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-9. B AND QG BOARDS B and QG boards B board Shield case (DIGITAL) 2-10. QG BOARD 2-11. P BOARD 2 5 screws 1 Upper lid of shield case (+PSW M3x8) 2 Connector AGU board 3 2 screws (+PSW M3x8)
  • Page 21: Dc Fan

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-13. DC FAN 80 fan plate 1 Screw (+BVTP 4x16) DC fan 2-14. MAIN DUCT (R) 2-15. DUCT BLOCK ASSEMBLY (WITHOUT MAIN DUCT (R)) 2 Pull out duct block assembly 1 Screw (+BVTP 4x16) 2 Pull out main duct (R) 1 2 screws (+BVTP 4x16) –...
  • Page 22: Fan (sirocco)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-16. D.C. FAN (SIROCCO) Lamp duct cover 5 Remove D.C. fan (sirrocco) upward 1 2 claws 4 Remove SIROCCO fan cover upward 3 Screw (+BVTP 4x16) 2-17. SPEAKER GRILL BLOCK ASSEMBLY Speaker grill block assembly 1 2 screws (+BVTP 4x16) 2-18.
  • Page 23: Screen Frame Block Assembly

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-19. SCREEN FRAME BLOCK ASSEMBLY 3 Screen frame 4x13) (E42A10) block assembly 2 4 screws (+BVTP 4x16) 4x13) (E50A10) 2-20. SPEAKERS 2-21. REAR COVER (WITH MIRROR) 2 Rear cover (with mirror) 2 Speaker 4 Speaker 1 2 screws...
  • Page 24: How To Replace Optics Unit

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-22. HOW TO REPLACE OPTICS UNIT 2-22-2. Remove Lamp Block (2) 2-22-1. Remove Lamp Block (1) Remove '' Door, Lamp ". Turn left "Lever, Lock" below, and then remove "Door, Lamp". Door, Lamp < A > < REAR VIEW >...
  • Page 25: Remove Stay (l), Side

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-22-7. Remove Stay (L), Side Take off 4 screws, and then remove 2 "Stay (L), Side". Stay (L), Side 2 screws 2 screws < B > < C > 2-22-8. Pull Out Some Blocks (1) 2-22-9. Pull Out Some Blocks (2) Pull out "B block", "Chassis block", and "Duct (R), Main"...
  • Page 26: Pull Out Some Blocks (4)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-22-11. Pull Out Some Blocks (4) Take off 1 screw. 3 screws 1 screw < F > 2-22-12. Pull Out Some Blocks (5) Loose 1 special screw. (This screw can not be taken off.) Optics unit block 1 special screw <...
  • Page 27: Pull Out Some Blocks (7)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 2-22-14. Pull Out Some Blocks (7) Remove 2 connecters to pull out some blocks as shown below. Connector < I > 2-22-15. Pull Out Some Blocks (8) Unlock "Purse Lock" to pull out some blocks as shown below.
  • Page 28: Electrical Adjustments

    KF-E42A10/E50A10 SECTION 3 RM-SA001 RM-SA001 ELECTRICAL ADJUSTMENTS 3-1. ELECTRICAL ADJUSTMENT BY REMOTE 3-1-2. Service Mode Adjustment COMMANDER 1. The SCREEN displays the item being adjusted. By using remote commander (RM-GA004), all circuit adjust- 2. Press “1” or “4” on the remote commander to select the ments can be made.
  • Page 29: To Read Lamp And Panel Time

    KF-E42A10/E50A10 RM-SA001 RM-SA001 FUNCTION OF KEYS ON COMMANDER 3-3. IRIS Adjustment • 1 : Changes adjustment item. (item No. moves up) Please check it after the replacement of the following parts. • 4 : Changes adjustment item. (item No. moves down) •...
  • Page 30: Diagrams

    KF-E42A10/E50A10 RM-SA001 RM-SA001 SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM (1) Note: AGU, B, HPC, P and QG boards are supplied as the block for service. C board is included in the Optics Unit Block. GA GW TROY Block Diagram (The parts on each boards are not supplied individually.)
  • Page 31: Block Diagram (2)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 BLOCK DIAGRAM (2) AGU BOARD AGU BOARD CN8006 CN8408 UNREG_11V Q5534 TU5700 BUFFER MAIN TUNER Q5533 VIDEO VIDEO Q5701 DET_OUT BUFFER BUFFER IC5502 AUDIO R AUDIO R IC5500 R_OUT 2D COMB FILTER CHROMA DECODER AUDIO L AUDIO L...
  • Page 32: Block Diagram (1)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 BLOCK DIAGRAM (3) IC7180 CN7180 SCL_TV TEMPERATURE SDA_TV AGU BOARD SENSOR CN8410 SET_5V (LAMP TEMPERATURE ) S7150 CN7150 LAMP DOOR LAMP_COV DETECTION AGU BOARD CN8410 (LAMP DOOR DETECTION ) S7155 CN7155 LAMP CONNECTOR LAMP_COV DETECTION AGU BOARD...
  • Page 33: Block Diagram (3)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 BLOCK DIAGRAM (4) CN7000 AGU BOARD CN8004 S7005 S7004 S7003 S7002 S7001 S7000 /TV/VIDEO WEGA GATE /VOLUME- /VOLUME+ /CHANNEL- /CHANNEL+ (PANEL SWITCH ) Q7024 LED DRIVER TIMER D7024 Q7023 LED DRIVER CN7020 Q7022 STBY D7023 LAMP STBY+3.3V LED DRIVER +3.3V...
  • Page 34: Block Diagram (5)

    KF-E42A10/E50A10 RM-SA001 RM-SA001 BLOCK DIAGRAM (5) T6000 D6000 D6034 R6100 CN6018 RECT R6016 RECT. LAMP DC LAMP DRIVER LAMP GND Q6001 VG(H) DRIVE CN6009 D6018 VSENSE IC6003 D6020 SET 9V Q6008 C BOARD VG(L) SET 9V DRIVE +9V REG CN604 3.3V...
  • Page 35: Frame Schematic Diagram

    KF-E42A10/E50A10 RM-SA001 RM-SA001 4-2. FRAME SCHEMATIC DIAGRAM LVDS actual connection: CN5003 to AGU (L type) CN5004 to AGU ACN MAIN GRN/Y CN4801 to QG CN4802 to QG CN4803 to QG 17pins(LVDS) CN5005 to AGU CN5403 XX CN5401 to C ACN MAIN BLUE/U...
  • Page 36: Circuit Boards Location

    KF-E42A10/E50A10 RM-SA001 RM-SA001 4-3. CIRCUIT BOARDS LOCATION Terminal name of semiconductors in silk screen printed circuit ( Device Printed symbol Terminal name Circuit Collector Transistor Emitter Base Collector Transistor Emitter Base Cathode Diode Anode Cathode Diode (NC) Anode Cathode Diode...
  • Page 37: Schematic Diagram Of As (1/2) Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (1) Schematic Diagram of AS (1/2) Board L5508 10uH B1616 IC5501 BA50BC0FP-E2 L5500 10uH IC5507 FB5510 C5574 C5531 C5582 C5534 C5535 R5528 IN B C5503 0.01 R5532 Q5512 C5501 2SA1235TP-1EF 1608 1608 IN A 1608 1608 1608...
  • Page 38: Schematic Diagram Of As (2/2) Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (2) Schematic Diagram of AS (2/2) Board Main Tuner Sub Tuner BTF-BG402 BTF-BG412 TU5700 TU5701 R5748 R5751 R5758 R5737 1608 R5752 1608 R5739 R5743 0.5% 1608 R5742 C5726 C5716 1608 1608 C5719 R5718 2200p 1608 R5749 R5757...
  • Page 39: Schematic Diagram Of Gt (1/2) Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (3) Schematic Diagram of GT (1/2) Board CN6005 CN6011 CN6012 CN6015 TO LAMP DR D6034 R6100 CN6018 D4SBL40 L6009 1/2W JL6004 LAMP DC R6002 LAMP GND 100k C6084 JL6005 400V C6279 C6280 R6003 1000p 1000p C6083 100k...
  • Page 40: Schematic Diagram Of Gt (2/2) Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (4) Schematic Diagram of GT (2/2) Board 001:11B SET9V D6400 1SS133T-77 R6425 OFF_MUTE R6401 1/10W Q6405 RN-CP C6400 2SA1235TP-1EF R6424 1/10W 1000 RN-CP 1/10W Q6400 RN-CP 2SC3052EF-T1-LEF R6426 1608 1/10W RN-CP R6422 R6400 1/10W RN-CP JL6400 D6401...
  • Page 41: Schematic Diagram Of Ha Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (5) Schematic Diagram of HA Board S7002 S7003 S7004 S7005 S7000 S7001 R7001 R7002 R7003 R7004 R7005 1.8k 3.9k 1/10W 1/10W 1/10W 1/10W 1/10W RN-CP RN-CP RN-CP RN-CP RN-CP 0.5% C7000 1608 CN7000 VD7000 TO AGU BOARD...
  • Page 42: Schematic Diagram Of Hb Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (6) Schematic Diagram of HB Board (SIRCS, LED) STBY_RED POWER_GREEN P_MUTE_RED TIMER_GREEN C7025 D7022 D7024 SML-020MVT-T86 SML-020MVT-T86 1608 R7025 R7032 R7033 R7024 1/10W 1/10W 1/10W 1/10W RN-CP RN-CP RN-CP R7022 RN-CP R7029 R7034 R7026 Q7021 Q7024 1/10W...
  • Page 43: Schematic Diagram Of Hc Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (7) Schematic Diagram of HC Board CN7100 COMP2_Y J7100 VD7102 COMP2_CB VD7108 COMP2_CR CN7102 VD7101 VD7109 VD7100 VD7110 CN7101 COMP_DET R7123 D7108 V2_V UDZSTE-173.9B CHIP V2_L R7111 V2_R CHIP J7101 HP_L JL7102 VD7105 R7124 R7125 R7105 C7100...
  • Page 44: Schematic Diagram Of S2 Board

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (8) Schematic Diagram of S2 Board R7180 R7181 1/10W RN-CP SCL_TV R7182 SDA_TV 1/10W RN-CP SET_5V R7183 XX R7186 0 R7187 CN7180 C7183 C7182 C7180 C7181 R7185 R7184 R7188 IC7180 CHIP 1608 1608 1608 1608 LM75BIM-5/NOPB (LAMP TEMPERATURE)
  • Page 45: Schematic Diagram Of T1, T2 Boards

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (9) Schematic Diagram of T1, T2 Boards S7150 (LAMP DOOR) LAMP_COV CN7150 (LAMP DOOR DETECTION) S7155 (LAMP POSITION) LAMP_POS CN7155 (LAMP CONNECTOR DETECTION) – 44 –...
  • Page 46: Printed Wiring Boards

    KF-E42A10/E50A10 RM-SA001 RM-SA001 4-5. PRINTED WIRING BOARDS (1) AS Board • AS BOARD SEMICONDUCTOR LOCATION C5700 IC5507 L5701 C5702 IC5700 R5607 C5554 R5567 R5608 C5552 R5558 L5702 FB5510 R5609 C5551 R5571 R5559 C5586 Side A Side B R5570 FB5508 R5560...
  • Page 47: Gt Boards

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (2) GT Board • GT BOARD SEMICONDUCTOR LOCATION Side A Side B IC6000 IC6002 IC6003 IC6004 IC6007 IC6008 IC6010 IC6011 IC6012 IC6400 TRANSISTOR Side A Side B Q6001 Q6003 Q6004 Q6007 Q6008 Q6010 Q6011 Q6400 Q6401 Q6402...
  • Page 48: Ha, Hb Boards

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (3) HA, HB Boards – 47 –...
  • Page 49: Hc, S2, T1, T2 Boards

    KF-E42A10/E50A10 RM-SA001 RM-SA001 (4) HC, S2, T1, T2 Boards – 48 –...
  • Page 50: Semiconductors

    KF-E42A10/E50A10 RM-SA001 RM-SA001 4-6. SEMICONDUCTORS LM75BIM-5/NOPB 1SS184 P6SMB39AT3 M24C02-WMN6T(B) ANODE TOP VIEW 8 PINS CATHODE MCZ3001DB D10SC4M-F SML-020MVT-T86 D10SC6M-4012 TOP VIEW Cathode mark 18 PINS MM1431ATT NJM2870F18 (TE2) XXC6219B182MR Green SML-210MT-T86 SML-210VTT86 D2L20U-TA 5 PINS SML-310LTT86 RD8.2ES-B2 NJM2387DL2-TE1 CATHODE MARK...
  • Page 51: Exploded Views

    KF-E42A10/E50A10 SECTION 5 RM-GA004 RM-GA004 EXPLODED VIEWS NOTE: • Items with no part number and no • Items marked " " are not stocked since The components identified by shading and description are not stocked because they they are seldom required for routine mark are critical for safety.
  • Page 52 KF-E42A10/E50A10 RM-GA004 RM-GA004 5-2. B BLOCK, CHASSIS ASSEMBLY The components identified by shading and mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– –––––––––...
  • Page 53 KF-E42A10/E50A10 RM-GA004 RM-GA004 5-3. LAMP DUCT ASSEMBLY, OPTICS UNIT BLOCK The components identified by shading and mark are critical for safety. Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK ––––––––...
  • Page 54: Electrical Parts List

    KF-E42A10/E50A10 SECTION 6 RM-SA001 RM-SA001 ELECTRICAL PARTS LIST • Items marked " * " are not stocked since • RESISTORS The components identified by shading and they are seldom required for routine All resistors are in ohms mark are critial for safety.
  • Page 55 The components identified by KF-E42A10/E50A10 shading and mark are criti- cal for safety. RM-SA001 RM-SA001 Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK ––––––– –––––––– ––––––––––– ––––––– ––––––– –––––––– –––––––––––...
  • Page 56 The components identified by KF-E42A10/E50A10 shading and mark are criti- cal for safety. RM-SA001 RM-SA001 Replace only with part number AS GT specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK ––––––– –––––––– ––––––––––– ––––––– –––––––...
  • Page 57 The components identified by KF-E42A10/E50A10 shading and mark are criti- cal for safety. RM-SA001 RM-SA001 Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK ––––––– –––––––– ––––––––––– ––––––– ––––––– –––––––– –––––––––––...
  • Page 58 The components identified by KF-E42A10/E50A10 shading and mark are criti- cal for safety. RM-SA001 RM-SA001 Replace only with part number specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK ––––––– –––––––– ––––––––––– ––––––– ––––––– –––––––– –––––––––––...
  • Page 59 The components identified by KF-E42A10/E50A10 shading and mark are criti- cal for safety. RM-SA001 RM-SA001 Replace only with part number GT HA HB specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK ––––––– –––––––– ––––––––––– –––––––...
  • Page 60 The components identified by KF-E42A10/E50A10 shading and mark are criti- cal for safety. RM-SA001 RM-SA001 Replace only with part number HC S2 T1 T2 specified. REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO. DESCRIPTION REMARK ––––––– –––––––– –––––––––––...
  • Page 61 KF-E42A10/E50A10 RM-SA001 RM-SA001 Sony EMCS Corporation English 2005HR02-1 Ichinomiya TEC 9-872-761-01 ©2005.8...

This manual is also suitable for:

Kf-e50a10

Comments to this Manuals

Symbols: 0
Latest comments: