PICO Neo 2 Quick Start Manual page 3

How to install the Pico Neo 2.
1. Put on the headset and press the "Power-Button" for approximately 3 sec.
2. The instructions of the headset will start automatically
a. Connect the controllers by clicking on the "Pico Button".
b. You will be asked to choose the boundary.
i.
ii.
c. Put the controllers on the ground and use the "Trigger Button" at the
back of the controller to fix the ground.
3. You are now at the main menu of the Pico Neo 2 - enjoy the ride!
Wi-Fi - How to connect
1. Click on the Wi-Fi-Symbol in the task bar called "Wlan".
2. The headset will automatically search for any Wi-Fi in the area.
3. Choose your Wi-Fi and enter the password. - When done click on the
"enter-key".
4. Click on connect.-The headset will connect to the chosen Wi-Fi. You are now
connected to the chosen Wi-Fi
How to download applications from the Pico store
1. Click on "Store" in the Pico main menu.
2. Create a Pico account in the device or here.
https://us-passport.picovr.com/register/regpre?lang=en_US
3. Search for the desired application in the store.
4. Click on download or buy.
5. The application will then appear in your library.
VR Expert tips
Pico button
The Pico button is located on the controllers and the headset and has the Pico
symbol on it.
Pressing the Pico button shortly will bring you to the main menu at any time.
●
The running application will be minimized but not closed.
Double click on the Pico button will open the task manager. Here you can
●
'switch to' or close the active applications.
To 'center' the view, look straight ahead and hold the Pico button (either on
●
the headset or on the controller) for approximately 2 seconds.
Pico Neo 2 - Guide
Option 1 stationary.: Scale the room by sitting and looking down
at the floor.
Option 2 walk around:: Scale the room by walking around,
creating a circle with the controllers.