Maintenance And Care - Flex Ali 10.8 B Operating Instructions Manual

Switching on the power tool
Press the switch.
The power tool switch allows the speed
to be increased steplessly up to
maximum.
Switch off the machine:
Release the switch.
Notes
– The power tool features a brake which
stops the insertion tool as soon as the
switch is released.
– If the power tool is used continuously,
work mostly with the switch fully
depressed.
– If the switch is only gently depressed,
the work light comes on.
Working with the power tool
Caution!
Before performing any work on the power
tool, set the direction of rotation selector (5)
to the middle position.
1. Insert battery.
2. Insert tools.
3. Set torque preselection to the required
level (ALi 10.8 B/ALi 10.8 G).
4. Set selector switch to the required setting
(H = quick/L = slow).
5. Set required direction of rotation.
6. Switch on the device.
20
ALi 10.8 B/ALi 10.8 G/ALi 10.8 S
Work light
Several models include a work light which
can be operated with the second battery.
Press the button to switch the light on
and off.

Maintenance and care

Cleaning
Danger!
If metals are work over a prolonged period,
conductive dust may become deposited
inside the housing.
Regularly clean the power tool and
ventilation slots. Frequency of cleaning
is dependent on the material and duration
of use.
Regularly blow out the housing interior
and motor with dry compressed air.
Leave the power tool running.
Charger
Danger!
Before performing any work, pull out the
mains plug. Do not use water or liquid
detergents.
Remove dirt and dust from the housing
with a paint brush or dry cloth.
Repairs
Repairs may be carried out by an
authorised customer service centre only.
Spare parts and accessories
Other accessories, in particular insertion
tools, can be found in the manufacturer's
catalogues.