Flex Ali 10.8 B Operating Instructions Manual page 19

ALi 10.8 B/ALi 10.8 G/ALi 10.8 S
Torque preselection
(ALi 10.8 B/ALi 10.8 G)
Caution!
Do not change torque until the power tool
is at a standstill.
ALi 10.8 B:
ALi 10.8 G:
Set torque preselection to the required
setting:
– 1 – 10 : Screw position (ALi 10.8 B)
or
– 1 – 20 : Screw position (ALi 10.8 G)
– : Drill position
Notes
– The friction clutch is deactivated in the
drill position .
– At the correct setting the tool stops as
soon as the screw has been screwed in
flush.
Speed preselection
ALi 10.8 G:
Set selector switch to the required setting
(H = quick/L = slow).
Direction of rotation
Caution!
Do not change direction of rotation until
the power tool is at a standstill.
Set switch for selecting direction
of rotation to the required position:
– Left: counter-clockwise
(unscrew screws)
– Right: clockwise
(drilling, inserting screws)
– Middle: Starting lockout (tool change,
for all work on the power tool)
19