Table of Contents
Advertisement
Service
Maintenance
Maintenance
An exploded view of the 16048G/H for parts identification is shown in Figure 5-1
to Figure 5-4. Do not disassemble any further than shown. Maintenance consists
principally of cleaning contacts and replacing worn or damaged parts. Take special
care when cleaning contacts.
To order parts, use the Agilent part numbers listed in Table 5-1 to Table 5-4. If a
faulty part is located in an assembly that cannot be disassembled, order the next
higher assembly or return the fixture to the nearest Agilent Technologies
Sales/Service Office for repair or replacement.
Figure 5-1
Replacable Parts (part 1 of 4)
24
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
