Table of Contents
Advertisement
7. Press
About 1 minutes later, phase compensation data measurement is completed and
the softkey label changes to PHASE COMP [DONE].
8. Connect the Lcur, Lpot, Hcur, Hpot terminal on the 16048G or 16048H to the
Lcur, Lpot, Hcur, Hpot terminal of the 100 Ω Resistor respectively.
Connecting 100 Ω Resister (Load Data Measurement)
Figure 3-2
9. Press
measurement is completed, the softkey label changes to LOAD [DONE].
10.
Press done key.
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PHASE COMP [-]
key to start the phase compensation data measurement.
key to start the load data measurement.
LOAD [-]
Operation
4294A Setting
When the load data
19
Advertisement
Table of Contents
