Assembly - Dirt Devil Bag Line 7050 Operating Manual

2 Unpacking and assembly

2.2 Assembly

1
2
Fig. 2
1
3
2
Fig. 3
1
Fig. 4
4
2
1
Fig. 5
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. The appliance could be switched on by
accident.
1. Push the end of the suction hose (Fig. 2/1) into the re-
ceiver opening (Fig. 2/2) on the cylinder vacuum clean-
er until the lock clicks into place audibly and noticeably.
2. Push the handle (Fig. 3/1) into the upper end of the tel-
4
escopic tube (Fig. 3/2).
3. Push the floor nozzle (Fig. 3/3) onto the lower end of the
telescopic tube (Fig. 3/4).
NOTE:
It may be necessary to push a bit harder.
4. Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) down. Then pull
the telescopic tube by the handle (Fig. 3/1) to the de-
sired length. To lock it, release the telescopic tube lock
when you let go. You will hear an audible click.
5. Push the accessories mount (Fig. 5/1) onto the handle
(Fig. 5/2). Then push the furniture brush (Fig. 5/3) and
crevice nozzle (Fig. 5/4) on to the holders for these.
NOTE:
If necessary, you can also attach the accessories mount
3
to the telescopic tube.
Your cylinder vacuum cleaner is now ready to use.
25