Unpacking And Connecting; Unpacking; Assembly - Dirt Devil Royal CENTRINO SX Operating Manual

2 Unpacking and connecting

2 Unpacking and connecting

2.1 Unpacking

2.2 Assembly

2
1
3
1
3
2
2
4
1
22
1. Unpack the appliance and all accessory parts.
2. Check the contents are all there. Information regarding
the scope of delivery,
Centrino SX".
ATTENTION:
Always transport/send the appliance in its original
packaging so that it does not become damaged. Keep
the packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then
contact your dealer immediately.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. It could be switched on by accident.
1. Push the end of the suction hose (Fig. 2/1) into the
receiver point (Fig. 2/2) of the cylinder vacuum cleaner
until the lock audibly clicks into place. Make sure that
the release button (Fig. 2/3) points down.
Fig.2
2. Push the handle (Fig. 3/1) into the upper end of the
4 telescopic tube (Fig. 3/2).
3. Push the floor nozzle (Fig. 3/3) onto the lower end of the
telescopic tube (Fig. 3/4).
NOTE:
It may be necessary to push a bit harder.
Fig.3
4. Push the accessories mount (Fig. 4/1) onto the handle
(Fig. 4/2). Then push the furniture brush (Fig. 4/3) and
crevice nozzle (Fig. 4/4) on to the holders for these.
NOTE:
If necessary, you can also attach the accessories mount
to the telescopic tube.
3
Fig.4
Page 18, "An overview of your