Temperature Unit; Power-On Delay - ABB CM-TCN Manual

6.1.2.

Temperature unit

The temperature unit can be individually set to either Celsius °C or Fahrenheit °F.
By changing the temperature unit all parameters in the device are automatically
adapted to the new unit, no further adjustments from the user-side are needed.
Common settings – Temperature unit:
6.1.3.

Power-on delay

The device has a configurable power-on delay. During the power-on phase the
measured values are not evaluated by the relay and therefore do not lead to a
premature trip.
The default start-up time is 2 seconds.
Common settings – Power-on delay:
STATUS
Approved
© Copyright 2020 ABB. All rights reserved.
SECURITY LEVEL
Public
S M ART T EMP ER ATUR E MONITORI NG R EL AYS
DOCUMENT ID.
2CDC112285M0201
REV. LANG. PAGE
B en 34/42