Error Handling, Maintenance And Service; Additional Functions; Display On-Time - ABB CM-TCN Manual

6.

Error handling, maintenance and service

6.1.

Additional functions

In additional functions device-related settings like temperature unit can be
found. Additionally, the menu offers the user the possibility to store up to three
individual texts in the device.
Menu Parameter
Common Display ON-
settings time
Device:
Temperature
unit
App:
Power-on de-
lay
User defined
text 1-3
6.1.1.

Display ON-time

The display ON-time means the time the display back light will stay on after no
action is registered. The backlight can be continuously on or off or be set to a
specific time.
The default display ON-time is 30 seconds.
Common settings – display ON-time:
STATUS
Approved
© Copyright 2020 ABB. All rights reserved.
Symbol Explanation
Time during which the
display backlight is on.
Selection of the tem-
perature unit in which
temperature values
will be displayed and
processed
Delay after relay start-
up. During this phase
the relay does not
evaluate the measured
values.
A user defined text
consisting of x digits
can be stored
SECURITY LEVEL
Public
S M ART T EMP ER ATUR E MONITORI NG R EL AYS
Data range
[OFF, 10 s,30 s, 1 min, 2
min, 5 min, 10 min,
30 min, 1 h, ON]
Default: 3 s
[Celsius °C, Fahrenheit °F]
Default: °C
[3.0-999.9 s]
Default: 3 s
[A-Z, 1-9, :, ;, <, =, >,?,°]
DOCUMENT ID.
2CDC112285M0201
REV. LANG. PAGE
B en 33/42