Fasten Bicycles On The Drawbar Carrier - LAS 11807 Operating Instructions Manual

REQUIRED PARTS
Fastening straps and Safety straps
MOUNTING:
With the aid of the drawbar attachments supplied, attach the drawbar carrier to the drawbar of your caravan. The plastic blocks are positioned under the drawbar
carrier on the caravan drawbar, so that the U-clamp of the drawbar carrier can move freely and does not come into contact. The attachment clamps are fitted
around the profile of the drawbar from below, and secured to the drawbar attachment with the pipe clamps, washers and nuts. After attachment to the drawbar,
you can bolt the holders firmly to your drawbar carrier using the 4 mm locking bolts supplied.
CAUTION:
The steering lock must not be impeded.

FASTEN BICYCLES ON THE DRAWBAR CARRIER

Put the first bicycle in the first wheel rail (closest to the vehicle) and fasten on U-bolt with the short fastening straps.
Fasten the wheels with the 3 small fastening straps. Please take care, that 2 fastening straps are foreseen for the steerable wheel and one fastening strap is for
the fixed wheel. Usually the second bicycle is placed opposed into the second rail and also fastened on the U-bolt with the short fastening straps. Fasten the
wheels as described for bicycle one.
It might be necessary to adjust the bicycles individually on the drawbar carrier other then described in order to fasten the bicycles correctly. Now secure the
bicycles with the long safety strap. Pull the safety strap through the bicycle frames and around the U-bolt and fasten the safety strap tightly.
10
Picture 3
Drawbar fastening
Plastic bloc
Locking screws