Assembly Of Compressor - MARUTI SUZUKI Maruti 800 Service Manual

1B-32 AIR CONDITIONING (OPTIONAL)

ASSEMBLY OF COMPRESSOR

NOTE:
Do not re-use gasket shaft seal, O-rings, or washers. Use
overhaul gasket kit.
Before starting assembly, make sure all parts and work-
bench are clean.
1) Install rear valve plate (2) on rear cylinder.
a. Install two pins in rear cylinder.
b. Lubricate new O-ring with compressor oil.
Install O-ring in rear cylinder.
c. Install suction reed valve (1), rear valve plate (2), and discharge
reed valve (3) onto rear cylinder top.
For installing positions, refer to the figure.
NOTE:
Front and rear reed valves (suction and discharge) are
the same.
Rear valve plate is marked "R".
4. Pin holes
d. Lubricate gasket (1) with compressor oil. Install gasket (1) on
valve plate.
NOTE:
Front and rear gasket are different, so do not interchange
them.
Assemble gasket so that their protruded surfaces face up-
ward.