MARUTI SUZUKI Maruti 800 Service Manual page 80

b. Turn special tool (F) unit its protrusion (1) engages with the
groove (3) provided on lip seal (2).
c. Check that special tool (F) goes down slightly when the protru-
sion (1) and groove (3) are engaged.
d. Turn special tool (F) by 305 – 605.
e. Pull up special tool (F) to remove lip seal (1).
6) Remove joint service connector (1).
7) Remove "O" rings from service connector and discard them.
8) Drain oil into container.
9) Remove front housing.
NOTE:
Do not reuse five washers.
1. Bolt
2. Washer
AIR CONDITIONING (OPTIONAL) 1B-29