Rear flue exit
The iron piece (6) on the back of the stove is knocked out with easy, firm taps with a ham-
mer next to the small "bridges" connecting the piece. The round disk (7), which is attached
to the back of the stove with 2 screws and a ball stop, is detached and fastened to the top
exit instead. The flue collar (1) is attached to the back of the stove with the included screws
(2) and the fittings (4).
The round disk (5) is seated in the top plate to close the flue exit opening.
The round disk (5), the fittings (4) and screws (2) is enclosed in the stove.
The ball stop (3) is not used when installing with the flue collar to the rear.
••
••
••
• •
• •
• •
• •
• •
• • • •••••
• • • •••• • ••••••••••
••••• •••••••
• • • •• ••• • •• • •••
•• •••• • •• • • • • • •
• • ••• •• • • • • • • •
• •
7