CODELOCKS CL4500 Getting Started Manual page 2

This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Apple, the Apple logo, and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a service
mark of Apple Inc.
Android, Google Play and the Google Play logo are trademarks of
Google Inc.
Basic Programs
01 Change the Master Code
Note: The Master Code is 8 digits in length
# Master Code 01 New Master Code New Master Code • •
Example: # 12345678 01 87654321 87654321 • •
Result: The Master Code has been changed to 87654321
02 Change the Sub-Master Code
Note: The Sub-Master Code is 8 digits in length
# Master Code 02 New Sub-Master Code New Sub-Master Code • •
••
Example: # 12345678 02 44556677 44556677 • •
Result: The Sub-Master Code has been changed to 44556677
03 Delete the Sub-Master Code
#Master Code 03 • ••
Example: # 12345678 03 • ••
Result: The Sub-Master Code has been deleted
15.1 Lock-Down
Prevent the lock from being unlocked by any method except via
Master Code and Sub-Master Code:
#Master Code 15 1 • • ••
Example: # 12345678 15 1 • • ••
Result: Lock-Down is enabled. Only the Master and Sub-Master
Codes can be used to open the lock.
15.2 Cancel Lock-Down
# Master Code 15 2 • • ••
Example: # 12345678 15 2 • • ••
Result: Lock-Down is cancelled.
Troubleshooting
Incorrect Code/Card
If 3 incorrect access attempts are made, the lock will suspend activity for 30 seconds.
Programming Error
If a programming mistake is made, the keypad will flash red and the lock will revert to normal operation.
Battery Failure
If the battery fails, the key-override should be used to open the lock. Batteries can be replaced by opening the battery cover on the rear of the
lock. Always use high-quality AA batteries and ensure that the batteries are inserted correctly. Please refer to local authority recommendations for
the disposal of old batteries.
• ••
• ••
•
• ••
Page 2
Find more online at www.codelockssupport.com
Clients (Users)
20.1 Add a Code Client
#Master Code 20 1 Code • • • ••
Example: # 12345678 20 1 3366 • • •
Result: The Code 3366 can now be used to unlock the lock.
20.2 Add a One-Time Code Client
#Master Code 20 2 Code • • • ••
Example: # 12345678 20 2 7788 • • •
Result: The Code 7788 can be used to unlock the lock once only.
20.3 Add a Smart Card Client
Note: After entering the program below, the lock will wait for a
MIFARE based smart card to be placed over the keypad.
# Master Code 20 3 • • •• present MIFARE card
Example: # 12345678 20 3 • • ••
Result: The smart card will be able to unlock the lock.
Note: Up to 150 cards can be registered.
21 Suspend a Code Client
#Master Code 21 Code • • ••
Example: # 12345678 21 1199 • •
Result: The Code 1199 has been suspended.
22 Restore a Code Client
#Master Code 22 Code • • ••
Example: # 12345678 22 1199 • •
Result: The Code 1199 has been restored.
••
••
present MIFARE card
••
••