Advertisement
PHASE 2 – INSTALLATION
2.2 WIRE MESH PARTITION INSTALLATION
2.2.1 Lift the partition inside the van and put it in place, then screws both brackets to the van.
NOTE: Be careful not to overtighten.
For technical support, contact us at 1-800-565-5321
NOTE: Drill the holes using 9/64" drill bit to
remove the paint inside the holes.
TOOLS
q Cordless Drill
q 10mm Socket
q 9/64" Drill Bit
HARDWARE USED
10×
#90-971 Self-Tapping Screw M6
C13-E Installation Guide | REV. F4 | Page 7
Advertisement
