Advertisement
PHASE 1 – ASSEMBLY
1.2 PARTITION ASSEMBLY
1.2.1 Remove all the PVC from all the parts, then attach the side brackets to the wire mesh partition using 12
fastining clips.
1.2.2 Attach floor bracket to the wire mesh partition using 4 fastening clips.
For technical support, contact us at 1-800-565-5321
HARDWARE USED
12×
#90-208 Hex Bolt 5/16" × 1"
#98-116 Flat Washer
#98-116 Flat Washer
#94-110 Locknut
TOOLS
q Cordless Impact
q 1/2" Socket
HARDWARE USED
4×
-
hand
tighten the nuts
#90-208 Hex Bolt 5/16" × 1"
#98-116 Flat Washer
#98-116 Flat Washer
#94-110 Locknut
C13-E Installation Guide | REV. F4 | Page 5
TOOLS
q Cordless Impact
q Knife
q 1/2" Socket
q 1/2" Wrench
.
Advertisement
