Table of Contents
Advertisement
Installation menu selection
These screens will appear only the first time you switch on the machine.
To change your settings: enter the
Welcome
Français
Nederlands
Select desired language
Set display
4
Contrast
Select contrast and brighness
Water hardness Sensor
Automatic hardness adjustment
during each cycle
Press
to confirm settings
Set Water Hardness
For water hardness settings
see instruction for use booklet
button.
1. Press the ON/OFF button.
2. Select the desired language.
3. Confirm.
English
N.B.:
Deutsch
an audible beep sounds each time a button is
pressed.
Italiano
You may need to adjust the contrast and the
brightness depending on the lightning in your
room.
9
Select the arrows to lighten or darken the
display.
Brightness
The machine will automatically set the water
hardness level in order to give you directions on
salt filling,
OR:
for some models you have to set the water
0
hardness level manually.
Please refer to the instruction for use booklet,
chapter on "How to fill the salt container".
The machine will show you some important
messages. Follow these and select
The machines is now ready. Select a cycle.
to proceed.
Advertisement
Table of Contents
