Before using the dishwasher, read the user instructions!
GSFP 5586
Programme selector knob
On / Off button
Start button
Switches "on" when the dishwasher
is operating. Flashes when a fault
occurs. Switches off at the end of
the programme.
Indicators
Add regeneration salt
Only add regeneration salt
immediately before starting a
wash programme.
Add rinse aid
Programme chart
Programmes
Pre-Rinse
Rapid 30 min
1)
Standard
Normal
Intensive
1)
Reference programme for energy label in
compliance with EN 50242 regulations;
2)
Refer to "User instructions";
Quick Reference Guide
Loading instructions
cold
Crockery to be washed later.
Lightly soiled crockery with no
40°C
dried-on food.
50°C
Normally soiled crockery.
Normally or heavily soiled
65°C
crockery.
Heavily soiled crockery, especially
70°C
pots and pans.
Wash cycle
Pre-Rinse
Washing
Options
"Delayed start" button
The wash cycle can be programmed to
start after 3-6-9 hours.
Then press the Start button.
The wash programme will start at the
set time.
"Half load" button
This function can be used with any
programme. The indicator lamp
switches on. The wash cycle is activated
for the upper or lower rack only.
2)
Detergent
A
B
-
-
X
-
X
X
X
X
X
X
3)
Values may vary in relation to usage, e.g.:
different loads, water temperatures - above or
below 15°C - as well as water hardness and power
supply voltage, etc.
5019 496 90233
(We reserve the right to make technical modifications)
GB
Programme
Drying
end
3)
Consumption
Litres
kWh
Minutes
4.0
0.03
14
10.0
0.65
30
13.0
1.05
120
13.0
1.45
90
20.0
2.00
125