Table of Contents
Advertisement
UD10
DISPLAY UNIT
A2493
UD10
DISPLAY UNIT
A2494
UD10 with NTMOS Connector board Wired to NTMOS Sensor with STb Termination box
4.3
J2
P1
NTMOS Sensor Wired Directly to UD10 via the NTMOS Connector board
CONNECT TO UD10 MODULE VIA
RIBBON CABLE (FACTORY INSTALLED)
J2
P1
CONNECT TO UD10 MODULE VIA
RIBBON CABLE (FACTORY INSTALLED)
NTMOS CONNECTOR BOARD
NOTE 1
NOTE 2
NOTE 3
NTMOS CONNECTOR BOARD
NOTE 1
NOTE 2
NOTE 3
F-3
REMOVE UD10 ELECTRONIC MODULE FOR ACCESS
TO NTMOS CONNECTOR BOARD (NO TOOLS REQUIRED).
GREY AND ORANGE WIRES FOR FACTORY USE ONLY.
HOUSINGS MUST BE ELECTRICALLY CONNECTED TO
EARTH GROUND.
STB TERMINATION BOX
REMOVE UD10 ELECTRONIC MODULE FOR ACCESS
TO NTMOS CONNECTOR BOARD (NO TOOLS REQUIRED).
GREY AND ORANGE WIRES FOR FACTORY USE ONLY.
HOUSINGS MUST BE ELECTRICALLY CONNECTED TO
EARTH GROUND.
NTMOS
H2S SENSOR
NTMOS
H2S SENSOR
95-8618
Advertisement
Table of Contents
