Content Important safeguards 2 Introduction 2 Features 2 Assembling the monitor 3 Assembling the monitor 3 Connections 3 Front panel controls 4 Control panel (TVM-1700/TVM-1900 model) 4 Control panel (TVM-2200 model) 4 Changing a monitor parameter 5 Hot keys 5 Adjustment procedure 5 ...
Important safeguards circumstances if the monitor will not be used for a long period of time, if the power supply cable or plug/connector is damaged or if the 1. Installation cautions: monitor housing is damaged or broken. • Do not block any ventilation openings. CAUTION: Do not attempt to dismantle this •...
Press the Menu button and activate the Self- Disassembling the monitor Diagnosis menu to determine whether your 1. Put a smooth pad or cloth on a level surface. monitor is functioning normally, not receiving a Place the monitor on it facing downwards. signal or is receiving a signal that is out of 2.
9. VGA Press the UP or DOWN arrow to scroll through RGB signal input. the available sources, and press LEFT or RIGHT arrow to confirm selection. (*) = Hot key Front panel controls Control panel (TVM-2200 model) Control panel (TVM-1700/TVM-1900 models) 1.
Adjustment procedure Secondary Function: Allows for vertical scrolling in the OSD menu, and to INCREASE the value of the selected menu function. Button ( * ) Allows for Vertical scrolling in the OSD Menu, and to DECREASE the value of the selected submenu function.
Page 8
3. Color Mode Geometry Choose a different preset color temperatures or set your own customized color parameters. (Normal/Warm/Cool/User) 4. Scale Select the screen size (HDMI mode only) 5. Auto Choose automatically the proper horizontal position and vertical position and size of the screen image.
OSD V-Position 8. Screen Format (Full/Zoom1/Zoom2/Subtitle/4:3/panorama) Adjust the OSD position of the Display vertically (up or down). Sound 5. OSD Timeout Adjust the display of the OSD menu (5 to 60 seconds). 6. OSD Transparency Adjust the OSD. Transparency Information Shows the status of the current Display settings.
Self-diagnosis 2. MADi Select advanced color engine for automatic picture enhancement (2D/3D). If there is no image, the Self-Diagnosis screen will 3. H-Size be displayed. The self-diagnosis function checks if Adjust the width (horizontal size) of the screen the status of the monitor screen is No Signal, Out image.
TVM-1700/TVM-1900 models The monitor’s installation surface is compatible with other types of VESA standard stands. Hole spacing: 100 x 100 mm Screw length: 8 to12 mm Troubleshooting Symptom Check Picture is jittery Adjust Clock to set the screen position and adjust TVM-2200 model Clock value carefully until a noise is no longer...
Page 12
Symptom Check Low sound Adjust the volume on the OSD menu. Adjust the volume of the sound card in the computer. VIDEO screen Check if PICTURE mode cannot be seen has been set. Check if the video terminal is properly connected. No video Check if the video cable is correctly connected to the...
Specifications TVM-1700/TVM-1900 models Items TVM-1700 model TVM-1900 model Panel Screen size 17 in. (43.2 cm) 19 in. (48.3 cm) Pixel pitch 0.264 x 0.264 mm 0.294 x 0.294 mm View angle (H/V) 170°/160° 170°/160° Contrast ratio 1000:1 (typ) 1000:1 (typ) Response time 5 ms 5 ms...
TVM-2200 models Items TVM-2200 model Panel Screen size 22 in. (55.9 cm) Pixel pitch 0.282 x 0.282 mm View angle (H/V) 170°/160° Contrast ratio 1000:1 (typ) Response time 5 ms Brightness 250 cd/m² (typ) Recommended resolution 1680 x 1050 @ 60 Hz Audio Speaker power 2 W x 2...