Device Repair And Return; Ordering Information; Detector - UTC Fire and Security DET-TRONICS FlexVu UD10 Instructions Manual

DeVice repAir AnD return

Prior to returning devices, contact the nearest local
Detector Electronics office so that a Return Material
Identification (RMI) number can be assigned.
written statement describing the malfunction must
accompany the returned device or component to
assist and expedite finding the root cause of the
failure.
Pack the unit properly. Always use sufficient packing
material. Where applicable, use an antistatic bag
as protection from electrostatic discharge. The RMI
number should be clearly marked on the outside of the
box.
Inadequate packaging that ultimately causes
damage to the returned device during shipment
will result in a service charge to repair the damage
incurred during shipment.
Return all equipment transportation prepaid to the
factory in Minneapolis.
It is highly recommended that a spare be kept on
hand for field replacement to ensure continuous
protection.

orDerinG informAtion

Sensor module, transmitter module and termination
boxes (if used) must be ordered separately.
Refer to the UD10 Model Matrix for ordering details.
UD10 MODEL MATRIX
MODEL DESCRIPTION
Universal Display Unit
UD10
TYPE
A
S
4.3
noTe
noTe
MATERIAL
Aluminum
Stainless Steel (316)
TYPE THREAD TYPE
5M 5 Port, Metric M25
5N
5 Port, 3/4" NPT
TYPE OUTPUTS
25 Relay, 4-20 mA, RS485, HART
TYPE
W
REplACEmENT pARTS
part Number Description
009700-001 Magnetic Tool
A
009489-001 Electronics Module
101197-001* Stop Plug, 3/4" NPT, AL
101197-004* Stop Plug, 3/4" NPT, SS
103517-001 Stop Plug, M25, AL, IP66
101197-003 Stop Plug, M25, SS, IP66
102804-001 Reducer, M25 to M20, AL
102804-003 Reducer, M25 to M20, SS
103922-001 475 Field Communicator
102868-001 Lubriplate grease, 14 oz.
005003-001 Lubriplate grease, 1 oz.
*NEMA 4/IP66 rating requires addition of non-hardening
thread sealant or Teflon tape.
ASSISTANCE
For assistance in ordering a system to meet the needs
of a specific application, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: det-tronics@det-tronics.com
APPROVAL
FM/CSA/ATEX/CE
TYPE CLASSIFICATION (Div/Zone)
2 Ex d (Flameproof)
TYPE OPTIONAL CONDITIONING BOARD
NTMOS
N
19 95-8618