Omron G9SA Series Manual page 17

No. Area No. Classification No.
D
Operating and Storage
Environments
E A
Relay Plug-in Relays 1
Mounting
Operations
B
Printed Circuit
Board Relays
C
Common Items 1
F
Handling Relays
G
Relays for Printed Circuit Boards
(PCBs)
H
Troubleshooting
A Using Relays
• When actually using Relays, unanticipated failures may occur. It is
therefore essential to test the operation is as wide of range as
possible.
• Unless otherwise specified in this catalog for a particular rating or
performance value, all values are based on JIS C5442 standard
test conditions (temperature: 15 to 35°C, relative humidity: 25% to
75%, air pressure: 86 to 106 kPa). When checking operation in the
actual application, do not merely test the Relay under the load
conditions, but test it under the same conditions as in the actual
operating environment and using the actual operating conditions.
• The reference data provided in this catalog represent actual
measured values taken from samples of the production line and
shown in diagrams. They are reference values only.
• Ratings and performance values given in this catalog are for
individual tests and do not indicate ratings or performance values
under composite conditions.
http://www.ia.omron.com/
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1 Operating, Storage, and Transport
2 Operating Atmosphere
3 Using Relays in an Atmosphere Containing Corrosive Gas (Silicon, Sulfuric, or Organic Gas)
4 Adhesion of Water, Chemicals, Solvent, and Oil
5 Vibration and Shock
External Magnetic Fields
6
7 External Loads
8 Adhesion of Magnetic Dust
Panel-mounting Sockets
2 Relay Removal Direction
3 Terminal Soldering
1 Ultrasonic Cleaning
Removing the Case and Cutting Terminals
2 Deformed Terminals
3 Replacing Relays and Performing Wiring Operations
4 Coating and Packing
1 Vibration and Shock
2 Dropped Products
1 Selecting PCBs, (1) PCB Materials
2 Selecting PCBs, (2) PCB Thickness
3 Selecting PCBs, (3) Terminal Hole and Land Diameters
4 Mounting Space
A Ambient Temperature
B Mutual Magnetic Interference
5 Pattern Design for Noise Countermeasures
A Noise from Coils
B Noise from Contacts
C High-frequency Patterns
6 Shape of Lands
7 Pattern Conductor Width and Thickness
8 Conductor Pitch
9 Securing the PCB
10 Automatic Mounting of PCB Relays
Item
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Page
C-9
C-10
C-11
C-11
C-15
C-3