Connecting Usb Devices; Adjusting The Monitor (Select Products Only) - HP EliteDisplay E243d 23.8 User Manual

8. Connect the DC cable to the power OUT connector on the monitor and the other end to the power IN
connector on a host computer. When using USB Type-B for video and data, use DC OUT (DC-to-DC cable.
Only one host computer should be connected to either the USB Type-C or DC OUT port for power pass
through. Connecting two host computers to the monitor can result in system shutdown, loss of power,
and the need to turn off and restart the monitor.

Connecting USB devices

The rear of the monitor provides one USB Type-B and one USB Type-C port that function as an upstream hub
for the monitor's USB Type-A downstream ports. There are two USB Type-A downstream ports on the rear of
the monitor, and two USB Type-A downstream ports on the side of the monitor.
NOTE: You must connect the USB Type-C upstream cable or USB Type-B upstream cable from the source
device to the rear of the monitor to enable the USB Type-A downstream ports on the monitor.

Adjusting the monitor (select products only)

To support an ergonomic work space, your monitor offers the adjustment options outlined in this section.
Setting up the monitor 13