Table of Contents
Advertisement
NOTE:
The monitor automatically determines which inputs have valid video signals. You can select
inputs by pressing the
Menu
Input control.
Connect one end of a VGA cable to the VGA port on the rear of the monitor and the other end to the
●
VGA port on the source device.
Connect one end of a USB Type-B cable to the USB Type-B upstream port on the rear of the monitor
●
and the other end to the USB Type-A port on the source device. This enables video and data pass-
through.
NOTE:
DisplayLink drivers are required for this setup. Drivers are available on the HP Support
website.
button to access the on-screen display (OSD) menu and then selecting
Setting up the monitor
9
Hide quick links:
Advertisement
Table of Contents
