Timeguard ETU17N Installation & Operating Instructions Manual page 5

• Reset the unit by simultaneously holding both
'CHANGE' and 'PROGRAM' buttons down until
the screen goes blank. Release the button.
This will clear any programmes stored in the
memory and after approximately 3 seconds
the display will show the following;
4
• You are now in clock setting mode at
the beginning of the program sequence.
5. Setting the Time
Note: This device has a 1 minute 'time-out' feature.
Once you start programming, if you leave the
device for more than 1 minute without pressing
a button, the device will think you have finished
and will automatically return back to normal
operating mode.
and Current Day