Cutting And Placing Thermal Pads - ekwb EK-Quantum Vector XC3 RTX 3080 D-RGB User Manual

CUTTING AND PLACING THERMAL PADS

Thermal Pad F – 1.0 mm (120 x 16 mm)
120 mm
STEP 1
Your GPU water block comes with thermal pads that have to be cut
into smaller pieces to cover all the VRM components, such as COILs,
MOSFETs, and drivers.
1 mm
Thermal pads:
STEP 1
4x Thermal Pad F 1.0 mm – (120 x 16 mm) EAN: 3830046996732
STEP 2
Once cut to size, thermal pads should be placed on the PCB, as
Thermal Pad F 1.0mm
illustrated below. EK made sure to provide you with more than an
adequate quantity of thermal pads to complete this Step.
STEP 2
- 9 -
You must remove the protective foil from both sides of the
thermal pad before installation.