Cleaning The Pcb - ekwb EK-Quantum Vector XC3 RTX 3080 D-RGB User Manual

OPTION 2
BACKPLATE
STOCK COOLER BACKPLATE
STEP 1
STEP 2
OPTION 2 – GPU Versions With a Backplate
Use the Phillips head screwdriver to remove the twelve marked screws
and the Stock Cooler Backplate from the backplate's side.
Carefully detach the PCB from the stock cooler and the backplate, and
disconnect all cables connecting the stock cooler to the PCB.
Always remove the stock cooler slowly - it might be firmly
glued to the PCB with thermal pads.
STEP 2

CLEANING THE PCB

Wipe off the remains of the original thermal compound using a
nonabrasive cloth or Q-tip, as shown in the sample image, until the
components and circuit board are completely clean. EK recommends
the use of denatured alcohol for removing TIM leftovers. After that,
remove all remaining stock thermal pads from the PCB.
- 8 -