Advertisement
5. Do these communication switch settings:
SP1104-23 (Switch 16)
6. Exit the Service Mode and cycle the machine off/on with the main power switch.
7. Do SP5990-001 to print the system parameter list, then confirm that "G3" is
listed as an option.
8. Enter the Service Mode and set the items required for PSTN communication.
• If one G3 line is installed, use SP3103 (PSTN-1 Port Settings) to do the
PSTN settings.
• If two G3 lines are installed, use SP3103 (PSTN-1 Port Settings) and
SP3104 (PSTN-2 Port Settings) to do the PSTN settings for the first and
second G3 line.
Set Bit 1 "1".
Set Bit 3 "1" if two G3 boards are installed.
1-226
February 2008
Advertisement
