Ricoh Martini-C3 Technical Bulletin page 12

9. Remove the jumper [A] on the MBU and set it to the ON position.
Important: If the jumper remains at the OFF position this will cause SC672
(Controller Startup Error) to appear.
10. Attach the FCU [B] to the interface board (
11. Press on the "RICOH" logo at [C] to confirm that the MBU is securely mounted
on the FCU.
[C]
x4).
1-210
February 2008
[A]
[B]
B819R106.WMF