Prior To Installation; Tools You Will Need - Kraus Oletto KPF-2620 Installation Manual

Prior to Installation:

•
Make sure you have all necessary parts by checking the diagram and parts list. If
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
•
Turn o the hot and cold water lines at the angle stops and turn on the old faucet
to release any built-up pressure
•
Pre-drilled countertop hole size requirement: 1-3/8"(min)
•
Max countertop thickness: 2-1/8"
13

Tools you will need:

Wrench Phillips Screwdriver
Silicone Sealant
Pipe Tape
Safety Goggles
(optional)
2