Tools; Service Tools - Supplied; Recommended Tools - Not Supplied - Husqvarna DSS 200 Workshop Manual

11.Tools

Service tools – supplied
Centre nut socket
Art. No: 587 35 71 – 01
● Fit to shape: 55 (mm)
● Centre shearer bolt nut for use
with 24mm socket wrench
Kit of O-rings
See DXR Workshop Manual
● Selection of replacement hydraul-
ic O-rings of occurring sizes.
Kit of NOP-plugs
See DXR Workshop Manual
Pressure proof metal caps
● Selection of occurring sizes.
Recommended tools – not supplied
Absorbents
● Absorbent sheets to collect spill from hydraulic fluid.
WRENCH TOOLS AND SPANNERS
Workshop wrenches/bits
Allen: 4—6, 8, 10, 17 (mm)
● Occurring fasteners
● 8mm, Low: ≤30mm
¾" Allen
17mm
● For tightening high-load bolts.
TOOLS FOR MEASURING
Torque wrench
1—200Nm
● Tightening torque of various
mountings.
Tools
● = Service action
|
Kit of PO-plugs
See DXR Workshop Manual
Pressure proof metal plugs
● Selection of hose plugs of occur-
ring sizes.
Kit of plastic plugs and
caps
See DXR Workshop Manual
● Selection of male and female ser-
vice plugs. Prevent leakage, or
contamination of hydraulic sys-
tem.
Spanners/sockets
Hexagonal: 10, 19, 22, 27, 30
(mm)
● Occurring nuts and bolt heads
Ratchet wrenches
Large+small
● Various bolts and screws.
Torque wrench, Large
100—500Nm, 3/4"
● Tightening torque of high load
bolts.
11
25