Purpose Of This Manual; Intended Audience - Analog Devices EZ-KIT Lite ADSP-BF533 Manual

Purpose of This Manual

is interfaced with the AD1836 audio codec, allowing you to create
SPORT0
audio signal processing applications.
off-board connector to allow communication with other serial devices. For
information about
The Parallel Peripheral Interface (PPI) of the DSP is connected to both a
video encoder and video decoder, allowing you to create video signal pro-
cessing applications.
The UART of the DSP is connected to an RS232 Line Driver and a DB9
male connector, allowing you to interface with a PC or other serial device.
Additionally, the EZ-KIT Lite board provides access to most of the pro-
cessor's peripheral ports. Access is provided in the form of a
three-connector expansion interface. For information about the expansion
interface, see "Expansion Interface" on page
Purpose of This Manual
The ADSP-BF533 EZ-KIT Lite Evaluation System Manual provides
instructions for using the hardware and installing the software on your
PC. This manual provides guidelines for running your own code on the
ADSP-BF533 EZ-KIT Lite. The manual also describes the operation and
configuration of the evaluation board's components. Finally, a schematic
and a bill of materials are provided as a reference for future ADSP-BF533
board designs.

Intended Audience

This manual is a user's guide and reference to the ADSP-BF533 EZ-KIT
Lite evaluation system. Programmers who are familiar with the Analog
Devices Blackfin processor architecture, operation, and programming are
the primary audience for this manual.
xiv
SPORT0
, see "SPORT0 Audio Interface" on page
SPORT0
ADSP-BF533 EZ-KIT Lite Evaluation System Manual
is also attached to an
3-8.
3-4.