Sonoro MEISTERSTUCK SO-610 Operating Manual page 40

14 AUX In 2 mode
14.1 Operation
Your external player (e.g. mp3 player) must be connected to the
auxiliary input jack 2 of MEISTERSTÜCK with an audio cable (with 3.5
mm connector, not supplied).
To access the
auxiliary input 2
mode,
To start and control
playback,
To mute or restore
the sound output,
14.2 Setup menu
Press SETUP in the AUX In 2 mode to access the setup menu (see chapter
"Using the menus"). The following options are available and the current
settings (if applicable) are marked with an asterisk (*).
▪ [Bluetooth headphone]
To connect or disconnect with a Bluetooth headphone, see chapter
"Basic operation".
▪ [System Settings]
See chapter "System Settings".
▪ [Main menu]
To access other playback modes or sleep timer.
© sonoro audio GmbH 2019
Press key on MEISTERSTÜCK or remote
control to toggle AUX In. 2.
Or, press MENU once, then
rotate the navigation knob) to select the
AUX In 2 mode and then press OK to
confirm.
Perform all playback operations on the
external player.
Press or
or
button.
(or
103