Performing Initial Setup - Sonoro MEISTERSTUCK SO-610 Operating Manual

6. If you want to connect MEISTERSTÜCK to your network using an
Ethernet cable, connect an Ethernet cable from LAN port on the
back of MEISTERSTÜCK to your router.
7. Plug-in the AC power cord.
3.4

Performing initial setup

When MEISTERSTÜCK is powered on for the first time, the "Setup
wizard" appears on the display. Follow the instructions below to configure
some basic settings.
1. When the "Setup Wizard" is displayed, press + or – on the remote control
(or rotate the navigation knob) to select "YES" and then press OK to
start the setup.
2. You are then prompted to select:
▪ Language (to be used in the display)
▪ Time format (12 or 24-hour),
▪ Source of auto update (Update from Radio, Internet or no update).
Depending on the selection you have made, follow the instructions on
the display to further set up date and time, time zone, daylight saving
78 © sonoro audio GmbH 2019