Sonoro MEISTERSTUCK SO-610 Operating Manual page 18

Connecting with a paired
Bluetooth headphone,
To disconnect a paired
Bluetooth headphone
© sonoro audio GmbH 2019
The small Bluetooth headphone icon
blinking and indicating that MEISTERSTÜCK is
in pairing mode. The Bluetooth headphone
icon stops blinking when the pairing is
completed. The paired Bluetooth headphone
device name is temporarily shown in the
display.
Note: Make sure that your Bluetooth
headphone is already in discovery mode and
ready for pairing. For detail please refer to
your Bluetooth device instruction manual.
In all operation modes except the Bluetooth
mode, press and hold key on
MEISTERSTÜCK or remote control. Or, press
SETUP once, then + or – (or rotate the
navigation knob) to select [Bluetooth
headphone], then select [Bluetooth pairing],
then [Paired devices], and then press OK to
confirm. Your paired Bluetooth device names
are shown in the display. Select your device
and press OK to confirm.
The small Bluetooth headphone icon
blinking and indicates that MEISTERSTÜCK is
in pairing mode. The Bluetooth headphone
icon stops blinking when the pairing is
completed. The paired Bluetooth headphone
device name is temporarily shown in the
display.
Note: Make sure that your Bluetooth
headphone is already in pairing mode, for
detail please refers to your Bluetooth device
instruction manual.
Press SETUP once, then + or – (or rotate the
navigation knob) to select [Bluetooth
headphone], then select [Bluetooth
disconnect] and then press OK to confirm.
is
is
81